© 2019 eastek  All rights reserved.

地址:桃園市桃園區同德11街58號7F-2  電話:+886-3-3568381   傳真:+886-3-3254911

ezCAM

Dynamic etch compensation – The best solution of Fine line compensation.

  • Solve the etching issues of Fine Line, Flip Chip, HDI and thick copper plates to improve production yield.

  • Elastic selections for dynamic etching compensation such as Surface or Line. Outputs various of plotter DI, LDI conversion.

  • The compensation parameters are modularized to provide the best compensation for the etching process of different product types.

  • The compensated line automatically carries the "Attribute " to provide the next elastic editing job.

Automatic calculation and repair of Tombstoning effect

  • Improve the yield of SMD jobs and avoid the Tombstoning effect of components assembly.

  • Improve the SMD solder paste flatness requirements in the PCB process.

  • Support a variety of customized Tombstoning effect compensation methods and parameter operations.

Automatic silk layer editing function improves efficiency

  • Automatic Legend editing solves the problem of traditional Legend issues caused by the layering operation.

  • Automatic Legend re-size & scaling improves the efficiency of manual editing and the yield of subsequent operations.

  • When the Legend line width is automatically re-size & scaling, the spacing between the Legend and the solder layer is also moved.

  • Comprehensively solve the efficiency and correct rate of PCB editing on the Legend layer

Signal Layer optimization and automatic copper excavation

  • speed up user efficiency in signal layer editing

  • Reduce errors through automation systems.

  • Meantime consider various spacing compensation for different re-size & scaling operations.

Automatic rout editing

  • Improve the actual routing size tolerance control, automatically calculate the compensated true coordinates.

  • Automatically find the arcs which are in too small radius to avoid the scrapping in routing operations.

  • The manual and automatic mouse edits the stamp hole and the slot length position.

  • Support G41/G42 Command of Right & Left path compensation for NC Router machine.

  • Support the automatic cutting range of large inner circle and non-standard closed area to solve the issue of excessive forming in routing job.

  • Support various routing machine output formats, such as Excellon I&II, S&M 3000, etc.。

FPCB gold finger automatic wiring and adds test point

  • Gold finger automatic wiring and adds test point, comprehensively Improve the efficiency of PCB CAM editing.

  • Automatically and manual select the same loop by set Netlist to the one test point.

  • Can set the wire width and pad size then automatically create a drill layer.

  • Can set line to line, line to pad and pad to pad safe spacing.

Compatible and break through Scripts automation

  • Completely compatible with Genesis Script applications to avoid re-work so does the high efficiency.

  • Support and compatibility with C-Shell, Perl and most PCB common scripts program.

  • Customized scripts can be developed if did the conversion system does not have to rewrite the script.

  • Script program development and application for CAM automation standardization mode.

FPCB automatic irregular angle layout for Panelization

  • Support irregular FPCB to consider different angles, embedding and inserting to achieve the best panelization work.

  • Provides the best layout utilization of the FPCB Shipping Panel and Working Panel.

  • Support X, Y axis layout and size reduction layout to meet production and process requirements.

  • Consider various edge and cutting spacing, various processing materials and tool hole spacing.

  • Automatically show maximum utilization, number of pcs, pcs angle, Size of Sub-panel, etc.

CAM Guide

  • Fast and efficient DRC/DFM solve CAM edit inspection issues.

  • The automatic CheckList of DRC/DFM can automatically check and repair jobs according to customer and factory regulations.

  • Different ERF parameters can be set according to different customer and factory rules.

  • Can classify the inspection jobs by setting the range of the defect values by oneself.

Automatic checklist analyzes DRC/DFM

  • Fast and efficient DRC/DFM solve CAM edit inspection problems.

  • The automatic CheckList of DRC/DFM can automatically check and repair jobs according to customer and factory regulations.

  • Different ERF parameters can be set according to different customer and factory rules.

  • Can classify the inspection jobs by setting the range of the defect values by oneself.

Support FPCB layer attributes and special DRC

  • Automatic analysis based on the layer attributes of the FPCB that have defined.

  • Output classification defects of each specific layer.

  • Increase the convenience of FPCB production inspection.

FPCB Smooth of corner rounding

Management of FPCB Tooling holes

Customized routing software automatically calculate the compensation of coordinates

  • Improve the actual routing size tolerance control, automatically calculate the compensated true coordinates.

  • Automatically find the arcs which are in too small radius to avoid the scrapping in routing operations.

  • Manual and automatic mouse editing edits the stamp hole and the slot length position.

  • Support G41/G42 Command of Right & Left path compensation for NC Router machine.

  • Support the automatic cutting range of large inner circle and non-standard closed area to solve the issue of excessive forming in routing job.

Optimal layout of FPCB in any angle

  • Support irregular flex boards to consider different angles, embedding and inserting to achieve the best layout work.

  • Support the best layout utilization of FPCB Shipping Panels, Working Panels and small modules.

  • Support X, Y axis layout and size decrease progressively to meet production and process requirements.

  • Consider various edge and cutting spacing, various processing materials and tool hole spacing.

  • Automatically show maximum utilization, number of pcs, pcs angle, Size of Sub-panel, etc.

Large copper surface automatic optimization and zoom editing

  • Improve the efficiency of large copper surfaces manual editing from N hours to minutes

  • Automatic processing of large copper surfaces when Pad Clearance is insufficient, it automatically re-size & scaling according to different prototype such as octagonal, diamond, and so on.

  • Meantime consider various spacing compensation for different re-size & scaling operations.

  • The large copper surface expands and contracts at the same time, considering the shortage of the Annular Ring and the safe spacing of the large copper surface.

Positive and negative film P&G automatically reserves safe conduction space

  • The inner layer P&G automatically Keep Clearance due to the Lamination process, and retains safety gap.

  • Reduce P&G and Thermal Pad open short circuit issues caused by re-size of clearance operations.

  • The inner P&G can automatically retain the safe spacing according to the customer's original when the P&G expanded and contracted.

  • P&G re-size & scaling work considers PTH, NPTH, NFP and Thermal pad spacing issues.